Mr.Geek

Using a paperclip you can reset the MM back to factory defaults, or just reset just the network configuration.

• Reset the network configuration: Push and hold the reset button for 3 seconds or less.
• Reset the management module to the factory defaults. This requires a sequence of presses and releases:
  1. Press and hold the reset button for 5 seconds.
  2. Release the button and wait 5 seconds.
  3. Press and hold the button for another 10 seconds.
  
  Note that this sequence should be as precise to ensure success: 5 in, 5 out, 10 in. After a full factory defaults reset in this way, the default user ID and password will be in effect: USERID (all caps) and PASSW0RD (a zero, not the letter O).